Somnofit-S/-B anti-snoring orthosis
Discover SOMNOFIT-S/-B, the most advanced and innovative anti-snoring mandibular advancement orthosis on the market. This orthosis is a medical device renowned for its effectiveness against snoring and sleep apnea, yet it's 30% smaller than its larger sister: thesOMNOFIT.
Download and print your size guide.
Our anti-snoring orthosis: SOMNOFIT-S/-B
The SOMNOFIT-S/-B anti-snoring orthosis is a thermo-formable thermo-formable mandibular advancement orthosis. Its principle of action is clinically recognized as effective against snoring and moderate sleep apnea (CPAP / PPC)
Its new patented concept provides comfort at night. In fact, its volume is reduced by 30% compared to other anti-snoring orthoses on the market, such as our classic Somnofit orthosis. It is rated No1 ++Testsieger++ in the German orthosis test!
The anti-snoring orthosis comes with 8 bands for perfect, effective adjustment to your situation and teeth.
How the SOMNOFIT-S/-B mandibular advancement orthosis works
Can't stand snoring? During sleep, the SOMNOFIT-S/-B orthosis moves the lower jaw forward a few millimeters. This movement frees the base of the tongue, opening the way for inhaled air. This proven method is effective in reducing snoring and sleep apnea. In the event of sleep apnea, the advice of your doctor or a healthcare professional is recommended.
The SOMNOFIT-S/-B orthosis enables you to enjoy restful nights and truly restorative sleep. Its small size ensures maximum comfort for snorers.
SOMNOFIT-S/-B orthosis packaging contents
The SOMNOFIT-S/-B anti-snoring orthosis consists of the following components:
- Two dental trays (an upper dental tray and a lower dental tray) that are thermo-adaptable to your dentition.
- An impression plate.
- A temperature indicator for thermoforming.
- Ventilated storage case.
- An assortment of 8 flexible bands for mandibular advancement adjustment.
- Instructions for use.
Orthosis instructions for use
1. Fill a saucepan with cold water to a height of 7 to 8 centimetres and place the temperature gauge in it. Heat the water until the center of the indicator turns from green to red (optimal temperature). Once this temperature has been reached, switch off the heat source. Leave the top gutter in the hot water for 3 minutes. (Do not use boiling water). Be sure to remove the drip tray from the pan and take the impression within 10 to 15 seconds.
2. Stand in front of a mirror. Remove the tray from the hot water with a spoon, shaking it to remove the water. Insert the tray, aligning the central hook with the slot between the upper central incisors. Adjust the width of the tray to the size of your jaw so that the molars are correctly inserted.
3. Hold the tray with one hand and the impression plate with the other. Bite down firmly to make the impression. Hold your teeth together and press your fingers against the sides of the tray to obtain a perfect mold of your teeth. Release the pressure on your teeth and rinse your mouth with cold water. Leave to cool for 2 minutes, keeping the tray in your mouth.
4. Keep the upper tray in your mouth, but remove the impression plate. Repeat steps 1 to 3 for the lower tray, without using the impression plate. Align the central slot of the lower splint with the hook of the upper splint.
5. Detach strip number 4 using a cutter or pair of scissors. Keep the other strips. Insert the upper gutter hook into the center hole of the strip and turn a quarter turn. Place the holes at the end of the band on the hooks of the lower gutter and turn a quarter-turn to lock them in place.
⚠️ The comfort and fit of the aligners depend on the shape of the teeth, the number of teeth and the quality of the dental impression. Make sure that the tray correctly reproduces the shape of your teeth. If this is not the case, repeat the impression at the correct temperature, applying sufficient pressure to form the device. If necessary, you can cut away any awkward parts of the thermo-forming material.
| See the SomnoFit-S instruction video. |
